Dudek ZEROGRAVITY, User Manual

Page: 31 / 48

!
After each installation of a rescue chute in a container a compatibility test is necessary. In order to do that, hang the harness,
equipped and packed as for flight. Seat down in the harness and assume the usual position in flight. Grab the container release
handle and pull it to the side in a resolute effort, so that the parachute is completely out of the container. Still, do not throw it away,
so that the bag remains closed. If the trial was successful, put the rescue back into the container.
If, however, the parachute could not be released properly, possible reasons are:
- too big a parachute in relation to container’s dimensions (after a repacking the parachute is usually bigger than it originally was)
- you pull the handle not resolutely enough or in wrong direction (i.e. to the front, to the back or upwards).
31