4. Speedbar
Please lead the speedbar lines through metal grommets in the front part of the seat, then push them through the side grommets into
the harness, finally lead them through the pulleys and put a stopper on the line. Fix the speedsystem hooks on the ends of the line.
Dock the speedbar in a magnetic fastener (3) below the front edge of the seat. In order to adjust the whole system you have to sit in
the harness while it is hanged by the paraglider’s risers. At full speedbar the pulleys on the risers should touch. When necessary,
adjust the lines later according to your experience in flight.
!
Do not adjust the speedsystem lines in flight.
i
The speedbar is not included in the harness on purchase.
1 – speedsystem line
2 – two-step speedbar
6
Summary of Contents for ZEROGRAVITY
