manualshive.com logo in svg

Ducati MULTISTRADA 1260, Owner'S Manual

Share
Download
Ducati MULTISTRADA 1260 Owner'S Manual Download Page 85

The following table indicates the most suitable level of DWC intervention for the various riding types as well

as the default settings in the "Riding Mode" that can be selected by the rider:

DWC

USE

DEFAULT

OFF

 

The DWC is disabled.

NO

1

HIGH PERFORMANCE Road use and track use for expert riders.

The system allows wheelies, but de-

creases the speed at which the front

wheel lifts.

NO

2

PERFORMANCE

Road use and track use for expert riders.

The system allows wheelies, but de-

creases the speed at which the front

wheel lifts.

It is the default level for the

"SPORT" Riding Mode

3

SPORTIVE

Track use and road use for expert riders.

The system reduces the motorcycle's

proneness to do wheelies and inter-

venes in case of wheelie.

It is the default level for the

"TOURING" Riding Mode

4

SPORTIVE

Track and road use for all kinds of riders.

The system reduces the motorcycle's

proneness to do wheelies and inter-

venes in case of wheelie.

NO

84

Summary of Contents for MULTISTRADA 1260










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands