manualshive.com logo in svg

Ducati MULTISTRADA 1260, Owner'S Manual

Share
Download
Ducati MULTISTRADA 1260 Owner'S Manual Download Page 254

Replacing the battery in the active key

Take special care (A) when removing the key battery.

Warning

Danger of explosion in case of battery improper

replacement. For replacement, use only the same or

an equivalent type of battery.

Warning

Do not expose the key to high temperatures,

such as on the instrument panel, and under direct

sunlight.

Warning

This symbol (B) warns the user about important

use and maintenance instructions contained inside

the documents provided with the equipment.

Note

The keys do not need to be reprogrammed after

replacing the battery.

D

1

B

A

Fig. 194

253

Summary of Contents for MULTISTRADA 1260










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands