Ducati MULTISTRADA 1260, Owner'S Manual

Page: 66 / 393

Riding mode change function
This Function allows changing vehicle Riding Modes
in static and dynamic conditions. There are four
possible riding modes: SPORT, TOURING, URBAN
and ENDURO.
To select the riding mode it is necessary to access the
specific Riding Mode Menu by pressing button (4) for
1 second.
The instrument panel displays the speed indication
(on the right) and riding mode name (on the left):
-
SPORT
- TOURING
- URBAN
- ENDURO
One of these will be highlighted to indicate that it was
the last memorised setting and is currently in use. The
“EXIT” message is also present: if button (4) is
pressed when this application is selected, the
instrument panel will quit without memorising the
new riding mode.
For the highlighted riding mode some of the
parameter settings are displayed:
- engine power (ENGINE): "ENGINE" message
followed by set engine power ("HIGH", "MED" or
"LOW");
- DTC system: the "DTC" message followed by the
level of intervention set ("1", "2", "3", "4", "5", "6",
"7", "8") in case the DTC is active or by "off" in case
the DTC is disabled;
- ABS system: the "ABS" message followed by the
level of calibration set ("1", "2", "3") in case the ABS
is active or by "off" in case the ABS is disabled;
Sport
Urban
Engine High
DTC 4
ABS 2
DWC 2
Front Default
Rear Default
Pre-Load 16
DQS Off
Exit
Sport
Touring
299
km/h
4 2
1
Fig. 22
65