manualshive.com logo in svg

Ducati MULTISTRADA 1260, Owner'S Manual

Share
Download
Ducati MULTISTRADA 1260 Owner'S Manual Download Page 320

From 1000 (621 mi) to 2500 km (1553 mi):

At this point, you can squeeze some more power out
of your engine. However never exceed 7,000

 

rpm.

Important

During the whole running-in period, the

maintenance and service rules recommended in the

Warranty Card should be observed carefully. Failure

to follow these instructions releases Ducati Motor

Holding S.p.A. from any liability whatsoever for any

engine damage or shorter engine life.

Strict observance of running-in recommendations will

ensure longer engine life and reduce the likelihood of

overhauls and tune-ups.

319

Summary of Contents for MULTISTRADA 1260










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands