manualshive.com logo in svg

Ducati MULTISTRADA 1260, Owner'S Manual

Share
Download
Ducati MULTISTRADA 1260 Owner'S Manual Download Page 103

Residual range (RANGE)

This function displays the range according to the

remaining fuel in the tank.

The mi or km value for the RANGE (residual range) is

displayed with “RANGE” indication and unit of

measurement (mi or km).
When the reading exceeds the maximum value (999

km or 621 mi), distance is reset and the meter

automatically starts counting from 0 again.
If there is any function fault, the instrument panel will

display three flashing dashes “- - -”.

If the instrument panel is not receiving RANGE

information, a string of three steady dashes "- - -" is

displayed.

If the instrument panel does not receive any

information on the unit of measurement, the default

unit of measurement is displayed flashing.

260

MENU

13.5

Km/l

Km

SETTING

RANGE

CONS

AVG1

1

4

2

Fig. 35

102

Summary of Contents for MULTISTRADA 1260










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands