manualshive.com logo in svg

Ducati MULTISTRADA 1260, Owner'S Manual

Share
Download
Ducati MULTISTRADA 1260 Owner'S Manual Download Page 170

Select NIGHT (night more) to permanently set display

black background for dimmed visibility -

recommended in case of poor ambient light and/or at

night.

Select AUTO (automatic mode) to automatically

adjust background colour according to ambient light

(detected by a sensor). If the external lighting is

strong, the display will switch to white background; if

the external lighting is poor, the display will switch to

black background ”.

Note

In case of battery off, when the voltage is

restored and upon next Key-On, back lighting will

always be set on "AUTO" mode.

169

Summary of Contents for MULTISTRADA 1260










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands