Ducati MONSTER S2R, Owner'S Manual

Page: 102 / 318

E
25
Adjusting the gear-change pedal position
(fig. 17)
To suit the requirements of each rider, the position of the
gear-change pedal can be adjusted relative to the footpeg.
To adjust the position, proceed as follows:
Hold rod (1) on using open-end wrench (2) and slacken off
locknuts (3) and (4).
Notes
Locknut (4) has a left-hand thread.
Turn the rod (1) and move the pedal to the required position.
Tighten both nuts against the rod.
1 3 4 2
fig. 17