36
ENGLISH
Radio-command codes self-learning
Press the
P3
push-button once to insert a “Opening Start” code; press the
P3
push-button
twice to insert a “Closing Start” code. Each time the push-button is pressed, the led LD1
flashes in acknowledgement. Subsequent pressures of the
P3
push-button must be spaced
by 1 sec. minimum periods. When the led is lit with a fixed light transmit the code to be learn
by means of the radio-command.
Setting the pause time (only if J2 jumper is inserted)
Press push-button
P2
until the led LD1 lights. Let the desired pause time pass, then press
push-button
P2
again.
Erasing all stored codes
Press push-button
P3
until the led LD1 goes off (about 10 seconds).
Setting the work time
Press the
Closing start
push-button or the corresponding push-button on the radio-command
until the metal rolling shutter is completely closed. Press push-button
P1
for about 3 seconds
(the led will light with a fixed light) until the metal rolling shutter starts to open. When it is
completely open press push-button
P1
again. The metal rolling shutter will stop and the led
will go off.
