24
ENGLISH
C) INSTALLATION
1)
Unscrew the cover screws and lift the cover. Check that the electronic unit is in good order.
In case of doubt do not install the unit and ask for the intervention of qualified personnel.
The container’s accessories (screws, round seal, cable glands) must not be left within the
reach of children since they are a potential danger.
2)
Check that the electronic unit is properly fixed to its box. If not, tighten all screws or provide
the missing screws.
3)
Place the unit near the roller shutter so that the system connection wires’ length is reduced
to the minimum.
Caution: For the unit’s correct operation the wires connected to it must not be longer
than 10 metres.
4)
For increased weather protection we recommend to place the unit under a roof or, even
better, in an enclosure having two side walls. Wherever possible, it is advisable to install
the unit at a minimum 1,5 mt level above the ground to keep it out of the reach of children.
5)
Before proceeding to assembly place the container so that the side fitted with the cable
glands is directed towards the ground.
Caution : Do not assemble the container on wood surfaces.
6)
Proceed to connect the unit wires as described in the following chapters.
D) OPERATION
1) D
EFINITIONS
OF
C
ONTROLS
AND
S
AFETY
DEVICES
Opening Start
Input connected to a push-button placed outside the unit. It is employed to request the
opening of the metal rolling shutter. A
N.O.
push-button is usually connected to this input.
