22
ENGLISH
A) SCOPE OF THE DEVICE
Electronic board controlling one 230 Vac single-phase asynchronous motor for the automation
of one metal rolling shutter.
B) LIMITS TO USE
Caution : Before operating the electronic unit make sure the following operations have
been carried out.
Note 1 -
Read carefully the whole technical documentation supplied.
Note 2 -
The electronic unit must be installed by qualified personnel only. The installation
engineer must have the necessary technical and professional qualification.
Note 3 -
The mains power supply connected to the unit must be 230 Vac +/- 10%.
Note 4 -
The neutral (N) pole of the mains power supply must be unipotential to the ground.
Note 5 -
All security norms for the installation of electric and electronic devices must be
respected.
Note 6 -
The mains power must be supplied with an efficient differential switch tested and
calibrated in conformity with the applicable rules.
Note 7 -
Before installing the electronic unit check the motor to which it will be connected.
When the motor is connected to the mains power the torque it apply to the metal
rolling shutter must respect the applicable rules and, in any case, it must be such
that in case of collision no damage will be caused to persons, animals or objects.
Note 8 -
The unit must be applied for the intended use only (see point A). All other use is to
be considered improper and dangerous.
