33
ENGLISH
T
ERMINAL
BOARD
J4
Terminal 1 –
Aerial input (signal)
Terminal 2 –
Aerial input (shield)
T
ERMINAL
BOARD
J5
Terminal 1 –
12 Vdc - negative power supply for security device
Terminal 2 –
12 Vdc + positive power supply for security device
C
ONNECTION
OF
THE
DEVICES
230 Vac mains power supply cable and ground –
Terminals 1 and 2 on J1
Warning: The cable’s ground pole must be connected to a good ground reference in
the metal rolling shutter’s nearby area.
Motor 1 –
Terminals 3, 4 and 5 on J1
Blinker –
Terminals 2 and 7 on J1
Courtesy light –
Terminals 6 and 2 on J1
Security device power supply –
Terminals 1 and 2 on J5
Aerial –
Terminals 1 and 2 on J4
NC security device contact –
Terminals 3 and 4 on J3
NO Opening start push-button –
Terminals 1 and 4 on J3
NO Closing start push-button –
Terminals 2 and 4 on J3
Important: Before starting the metal rolling shutter check all connections to the
electronic card. Check also the electric contacts’ switching.
