Page 11
Draw.15
3° step:
sliding the trolley with belt and pulley into the “U” rail
Slide the belt through the trolley as showned on draw.12 and then pass it around the pulley
.
Lock the belt with the securing plate as showed on draw.13-14
WARNING:
The securing plate must connect the belt in a specific position: on the side opposite to the
unlocking plug fixed on the trolley, and between the trolley and the pulley. The notch must face
inside.(draw.12)
Draw.12
Draw.14
Draw.13
Pulley
Belt
“U” rail
trolley
Belt securing plate
notch
facing inside
Slide the assembled belt, trolley and pulley into the assembled “U” rail .
Draw.16
