Dual NavAtlas XNAV3550 User Manual Download

Page: 50 / 86

USER’S MANUAL XNAV3550

Navigation

- 49 -

Managing itineraries

Save itinerary

Only itineraries that contain at least one route point may be

saved. Otherwise this icon is deactivated.
1.

Tap this icon to save the itinerary you have planned.
The N

AME OF THE ITINERARY

screen opens.

Enter a name for the itinerary.

For information on the use of the keyboard, please refer to
"Software keyboard".

Tap

OK.

Note: Only the route points will be saved. If you load an
itinerary, you will have to recalculate it.

Load itinerary

This icon is deactivated if there is no saved itinerary available.
1.

Tap this icon to load a saved itinerary, e.g. to modify it.
The S

ELECT ITINERARY

screen opens:

Select the itinerary you want to load.
For information on working with lists refer to "Lists".

Summary of Contents for NavAtlas XNAV3550























































































Search results

Summary of Contents for NavAtlas XNAV3550

Reviews:

Related manuals for NavAtlas XNAV3550

Brands by name

Popular brands

Dual NavAtlas XNAV3550, User Manual

Search results

Summary of Contents for NavAtlas XNAV3550

Reviews:

Related manuals for NavAtlas XNAV3550

Brands by name

Popular brands