Dual NavAtlas XNAV3550 User Manual Download Page 42

Page: 42 / 86

USER’S MANUAL XNAV3550

Navigation

- 41 -

Extended mode

In the M

AIN SCREEN

, tap Navigation.

The D

ESTINATION

screen opens.

Tap the Region entry field and select the country (or state,
or province) of your destination if it is not yet indicated.

Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.

1b On the D

ESTINATION

screen, tap Recent destinations.

Standard mode

In the M

AIN SCREEN

, tap Recent destinations.

Recent destinations

The R

ECENT DESTINATIONS

screen opens.

Tap the entry of the desired destination.

For information on working with lists, please refer to "Lists".

Tap

The route to the selected destination will be calculated. A

message window will inform you on the progress of the
calculation. You may begin navigation to the selected

destination once route calculation is complete.

Summary of Contents for NavAtlas XNAV3550























































































Search results

Summary of Contents for NavAtlas XNAV3550

Reviews:

Related manuals for NavAtlas XNAV3550

Brands by name

Popular brands

Dual NavAtlas XNAV3550, User Manual

Search results

Summary of Contents for NavAtlas XNAV3550

Reviews:

Related manuals for NavAtlas XNAV3550

Brands by name

Popular brands