DTS X BRICK, User Manual, Page: 8 / 39

User Manual Ver. 1.04 6 di 35
X BRICK
3 Important Safety Information
3.1 Fire Prevention

Minimum distance from illuminated surface: 0.5 m

Never expose the front lens, from any angle, to direct sunlight or strong
artificial light sources to avoid damage to internal parts of the product.
The lens may act as a powerful magnifying glass if exposed towards the sun
or any strong artificial light source; this will cause damage to the internal
parts even when the unit is turned off.
It is strongly recommended to leave the front lens directed towards the
ground when switching off or leaving the unit unattended.

The unit features various air inlets and cooling fans. Under no circumstances
should these be blocked or obstructed whilst the projector is operating. Doing
so may cause the fixture to seriously overheat, damaging it and compromising
its proper operation.

Each fixture produces heat and must be installed in a well-ventilated place.

Connect the projector to mains power via a thermal magnetic circuit breaker.
3.2 Prevention of Electric Shock

High voltage is present inside the unit.
Unplug the unit prior to performing any function which involves handling of
the insides of all parts of the product.

Class I appliance: connection must be made to a mains system fitted with an
efficient earthing.

X-BRICK requires the assistance of specialized personnel for all servicing. Please
always refer to an authorized DTS service center.
3.3 Level of protection IP

The projector is classified as an ordinary appliance and its protection level
against the penetration of solid and liquid objects is IP65.

Suitable for wet locations

The projector contains electric and electronic components which should under no
circumstances come into contact with oil, water, or any other liquid. The proper
functioning of the unit would be compromised should this occur .