DTS X BRICK, User Manual, Page: 32 / 39

User Manual Ver. 1.04 30 di 35
X BRICK
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
FAN STANDARD
Fans standard speed
(Default).
If temperature <15°C: fans
OFF.
If temperature >15°C: fans
speed is increased within the
factory values range.
SILENT
Reduced fans speed for a low
noise operation.
If temperature <15°C: fans
OFF.
If temperature >15°C: fans
speed is increased within the
factory values range.
ULTRA SILENT
Low fans speed for a very low
noise operation.
If temperature <15°C: fans
OFF.
If temperature >15°C: fans
speed is increased within the
factory values range.
AUTO
Automatic fans speed.
If temperature <40°C: fans
OFF.
If temperature >40°C: fans
speed is increased related to
system working conditions.
DEFAULT SET SURE
To restore factory settings.
SYSTEM INFO TEMPERATURE DRV1 41.4
40.8
DRV2 40.5
41.0
LED 48.2
PSU 43.4
MICRO 1 46.6
MICRO 2 45.5
DRV-1: LED Driver Master board
temperature monitoring.
DRV-2: LED Driver Slave board
temperature monitoring.
LED: LED temperature monitoring.
PSU: Power supply temperature
monitoring.
MICRO 1: Micro controller of LED
Driver Master board temperature
monitoring.
MICRO 2: Micro controller of LED
Driver Slave board temperature
monitoring.
SOFTWARE MASTER
DRV1 V.1.00
SLAVE
DRV2 V.1.00
LED Driver Master and Slave
board firmware release.
TIME
COUNTERS
S1 (R G B W)
S2 (R G B W)
S3 (R G B W)
S4 (R G B W)
UNIT LIFE
RGBW LEDs life time for each
sector and unit life time.
LEDS STATUS S1 (R G B W)
S2 (R G B W)
S3 (R G B W)
S4 (R G B W)
RGBW LEDs status monitoring
for each sector:
NA = Not available.
OK = LEDs properly working.
SH = LEDs in short circuit.
OP = LEDs in open circuit.