DTS X BRICK, User Manual, Page: 33 / 39

User Manual Ver. 1.04 31 di 35
X BRICK
14.1 Enable/Disable Wireless
Only for X BRIK Wireless and X BRIK PI Wireless
X-BRICK features a built-in Lumen Radio Wireless DMX transmitter/receiver
Operation as Receiver (default)
Enable Wireless DMX control under WIRELESS -> STATUS menu.
On the main display will appear “WIRELESS RX” (Default) above the DMX
address.
To log on the unit to Lumen Radio or Wireless Solution compatible
transmitter devices, press the connect button on the wireless transmitter
device. To optimize the wireless communication, maintain TX to RX line of
sight. The maximum distance should not exceed 100 meters.
Select UNLINK menu to log off the unit from paired wireless TX device.
Operation as Transmitter
Enable Wireless DMX control under WIRELESS -> STATUS menu.
Set the unit as Transmitter under DIRECTION -> TRANSMITTER menu.
On the main display will appear “WIRELESS TX” above the DMX address.
Connect the unit via DMX Input connector and pair the free wireless
receiver devices by selecting LINK menu.
To optimize the wireless communication, maintain TX to RX line of sight.
The maximum distance should not exceed 100 meters.
Select UNLINK menu to log off all the paired wireless receiver devices.