Figure 2.
View of the controller motherboard with the most important elements marked.
`
1.time-delay fuse (4A / 250V, T)
`
2. connector for connecting 230V AC power
`
3.connector for connecting the motor 1
`
4.connector for connecting the motor capacitor 1
`
5.connector for connecting the motor 2
`
6.connection for motor capacitor 2
`
7.connector for connecting the STOP button (NC)
`
8.connector of manual control buttons A, B, C
`
9. +24 VDC / ground potential (GND) accessory power connector
`
10. connector for connecting the OP, CL and OP / CL photocell outputs and ground potential for the
phototest function
`
11.aditional relay output (NO)
12. LED lamp connector (ground potential max. 6W), gate lock output 12 / 24V DC, power
24V
13.connection for connecting the limit switches of the actuator 1
14.connector for connecting the limit switches of the actuator 2
15.connector for connecting the encoder of the actuator 1
16. connector for connecting the encoder of the actuator 2
17. connector for connecting the 868MHz antenna
18. connector for connecting the 433MHz antenna
19. SW button used for Bluetooth communication and controller reset
20. LED diode indicating power supply to the controller
21. LED indicator of the operation of the Bluetooth communication module
22. LED indicating the operation of the controller
2
4
5
6
3
7
8
9
10
11
12
13
14
15
16
18
17
1
19
20
21
6
22
BLUE 232