1
1
1
1
2
2
2
2
5
Installation
3. Installation
3.1. An important reminder
Electrical installations and automation of the drive must be performed by experienced and
qualified personnel in accordance with applicable legal regulations. There is a dangerous voltage of 230V
/ 50Hz in the device, all connections must be made with the voltage turned off. The BLUE 232 controller is
classified in the category of "Automatic gates and doors" devices, requiring special care for safety
considerations. The installer's task is to mount the system safely enough to minimize the risk of its use.
Anyone who installs the device without complying with all applicable regulations is responsible for any
damage that the device may cause.
3.2. Description of the device and installation method
The BLUE 232 controller includes a motherboard and a housing. The housing has four points for
mounting it on a vertical surface [1] and cable glands on each side. The main board (fig. 2) should be
screwed to points [2] in fig. 1. The controller is equipped with a Bluetooth communication system that
functions as a user interface. The controller housing has an IP66 tightness degree. The cables should be
led to the device through the lower part of the housing. When making holes in the housing, remember to
ensure the required degree of "IP" tightness. The presence of the supply voltage is indicated by the
POWER LED.
Figure 1.
View of the controller housing, with the mounting locations for the housing [1]
and the controller mounting locations [2] marked.