13
Blue Motor Control
App
5.2.4. View of the connected Blue Motor Control App ready-to-run
If everything went well, the devices are ready for further operation. The application will display a
group of icons with groups of parameters and functions assigned to them.
These paired devices will connect automatically at a later time.
5.3. Restoring the factory settings of the controller.
If necessary, the PIN code and controller settings can be reset using the SW button. To do this,
press the SW button for 10 seconds, if the STATUS diode blinked, the controller restored the default
settings. Restoring the factory settings does not remove the remotes from the controller memory.
CAUTION!
Lowering the operating power of the actuators has a positive effect on safety conditions, as well
as on the service life of the mechanical elements of the installation.
CAUTION!
Violation of the photocells and blocking the gate during the learning process will not stop the
actuator! If necessary, the gate movement can be stopped by pressing the manual STOP button. It
will also interrupt the learn operation and restore all parameters of the controller to the values
they had before the learn function was initiated. During the learning procedure, the gate must be
able to move freely, without any obstacles on its way.
Rysunek 9.
Widok gotowej do pracy aplikacji Blue Motor Control.