DTM Print LX 3000e User Manual Download Page 7

Page: 7 / 65

1C. Identifying the Parts

This illustration shows the front of the printer with its control buttons and LED indicator

lights.

The

Pause Button

is pressed to pause a job to allow for loading of label stock and ink

cartridges. The printer pauses after the printing of the current label has finished. The
Pause LED will illuminate when the printer is paused.

The

Power LED

indicates that the printer is on and ready to receive print jobs.

The

Load/Feed Button

is pressed in order to load label stock if the printer does not

automatically detect the stock. When stock is loaded each press of the button will
cause one label to be fed through the printer.

The

Ink Low LED

will illuminate when a cartridge has 10% or less of its ink remaining.

The

Unload Button

will unload the installed label stock by reversing it through the

printer. Make sure to tear off the printed labels before pressing the Unload Button.

The

Label Tear Bar

is a serrated edge for conveniently tearing your finished labels from

the printer. The printer comes with a white tear bar guard. For smoother label feeding,
leave the guard in place during printing. When you are ready to tear off a label, remove
the guard, tear off the label and replace the guard.

Unload Button

Pause Button

Pause LED

Power LED

Load/Feed

Button

Ink Low LED

Label Tear Bar

Top Cover

Summary of Contents for LX 3000e

































































Search results

Summary of Contents for LX 3000e

Reviews:

Related manuals for LX 3000e

Brands by name

Popular brands

DTM Print LX 3000e, User Manual

Search results

Summary of Contents for LX 3000e

Reviews:

Related manuals for LX 3000e

Brands by name

Popular brands