DSS Eurocom series, User Manual

Page: 27 / 40

E x t e n s i o n F e a t u r e s
23
Redial last number in system memory
Dials the last external number only phoned from the
Terminal. An external line will be seized automatically.
If the redial code is dialled without going off-hook then
the phone switches to handsfree automatically.
Redial last 10 numbers in Executive Terminal
Press the left scroll key,
the last number dialled
will be displayed in the screen. Further presses will show
the 2
nd
to the 10
th
number dialled. To dial the displayed
number press the select key.
The last 10 numbers in the redial store can be deleted by
overwriting with 10 separate numbers.
Delete last number from System memory
The last number will be deleted from the system
memory. Note that the last 10 numbers dialled are also
stored separately in the Executive Terminal, these will
not be erased by this code.
Note that if a specific line was seized to dial
the last number then
will try to seize the
same line, it will give busy tone if this line is in
use, even if other lines are free. If ‘0’ is used to
seize a line then a free line will be used
automatically.
Line Access Digit
Your system may use either ‘0’ or ‘9’ to seize a free
exchange line, the terminal must be programmed to use
the same digit. Until correctly programmed, the ‘Line’
keys will not function correctly.
Set terminal to 0 for a line
Set terminal to use ‘0’ for a free line and 9(line) to use a
specific line.
Set terminal to 9 for a line
Set terminal to use ‘9’ for a free line and 0(line) to use a
specific line.
Lock Extension
It is possible to lock an extension so that it is not
possible to make or receive external calls, depending on
(308 system)
(612 system)
dial redial
…
07 Jun 00 Wed 10:09
R10 0123456789
Terminal Features
p p p p
Line access code: 0
or
(9 for line)
Terminal Terminal Terminal Terminal Features Features Features Features
p
Line
Line Line
Line access
access access
access code:
code: code:
code: 9
9 9
9
or