DSS Eurocom series, User Manual

Page: 35 / 40

E x t e n s i o n F e a t u r e s
31
edit, then del rec options. You will be asked for
confirmation.
Add an Executive Terminal speed dial entry
Select the speed dial store option. You will be prompted
for a contact name, enter the name as shown in
'Entering & editing names and numbers', below. If the
display shows 'memory full' then all 40 entries are in use,
to free a speed dial entry see 'Delete an Executive
Terminal speed dial entry', above.
Entering & editing names and numbers
To enter a letter press
the digit key with the
letter shown repeatedly until the required letter is
shown. E.g. for 'S' press key '7' four times. To enter a
space use key '1'. Each letter is confirmed when either a
different key is pressed or no key is pressed for ½
second. To switch between lowercase and uppercase
letters, press the ‘#’ key before the letter. If a mistake is
made the 'clear' key deletes the last letter, or all letters if
held down. Contact names may be up to 16 characters
long. Punctuation symbols may also be found on each
key, all characters for each key are shown below.
(space)
.-’1
ABC!2 DEF?3
GHI(4 JKL)5 MNO&6
PQRS7 TUV%8
WXYZ9
*=@<>
+;,$0
(Caps lock)
Press the 'enter' key to confirm the contact name.
Next, enter the
telephone number,
remembering '0' to seize an outside line, or any of the
line seizing codes shown in the table on page 33. A two-
second pause in the dial string may be added with ,
shown as P on the display. A recall or transfer key press
may be inserted into the dial string by pressing
,
shown as 'F' on the display. The dial string may be up to
20 digits in length. Press enter to store the entry. The
clear key will delete the last digit entered, while 'del num'
will clear the whole telephone number. Press 'enter' to
confirm the entry. Use the 'prog' key to exit at any time
without saving.
dial speed store
enter name
enter
enter number
enter
name:Company Name_
clear exit enter
No:01234567F123P123
clear del num enter