DSS Eurocom series, User Manual

Page: 10 / 40

T e r m i n a l U s e r G u i d e
6
will also connect to the caller. Pressing the line key on
it’s own will answer the call in handsfree mode.
Answering when extension is busy
If the extension is in use but other phones are ringing
then the call may be answered in one of two ways:
Drop current call
To answer a call ringing at another extension, end the
current call and pick up the handset when the phone
rings with the new call.
or
Current call on hold (for external calls only)
This will put the current external call on hold and
answer the incoming external call. The line key with the
flashing LED shows which key to press.
Making Calls
When you lift the handset, you will hear dial tone.
However, you may hear the special interrupted dial tone
indicating that incoming calls are diverted to another
extension.
You may dial as soon as the receiver is taken
off-hook. Leaving the phone without dialling
for 8 seconds will give error tone.
If you are on a call and an exchange line call
arrives then the alert tone will let you know
that a call is waiting if programmed by the
administrator.
All extensions have two digit numbers. The
extension numbers are 11 to 18, plus 19,
which can be used for a door phone only. The
larger 612 system also supports extensions 21
to 24 when fully expanded.
If you dial a code which is not valid, you will
hear the error tone. Replace the receiver and
then re-dial the correct number.
With programmable key
The extension will be dialled directly. To dial in
handsfree mode do not lift the handset.
Dialling with extension number
Dial the extension number.
or
Ñ
Ñ Ñ
Ñ
RINGING
Ò
Ò Ò
Ò
ext.