DSS Eurocom series, User Manual

Page: 38 / 40

T e r m i n a l U s e r G u i d e
34
Access Code Dialled Service Feature Description
**account_PIN Code to enter before dialling out if account codes
are active
* 719 # Operate door 1 latch relay
* 729 # Operate door 2 latch relay
* 21 ext. # Set All Call Diversion From Own Extension
* 2 N ext. # Set Divert No Answer After delay N = 2 – 9 for 5, 10,
… 45 sec.
# 21 ext. # Cancel All Call Diversion from another extension
# 21 # Cancel All Call Diversion from own extension
# 20 # Cancel all diversions
*31 ext. # Set Diversion On Busy
#30 # Cancel Diversion On Busy
#30 ext. #' Cancel Diversion On Busy from another extension
*7411# Toggle Do not disturb
*1 Read message on Executive Terminal (optional)
*6 … Extension feature programming code
*7 … Extension feature programming code
*8 … System feature programming code
*9 … System feature programming code
Feature Codes after Transfer key (T)
Access Code Dialled Service Feature Description
T0
(or 9)
Outgoing Exchange Line Call
(* For systems using 9 for a line)
T ext. Enquiry call to an extension (hang up to transfer)
T19 Operate door latch relay of connected door phone
T** account_PIN Code to enter before dialling out if account codes
are active
T* ext. Make a brokerage call to an extension
T*0
(or T*9)
Make a brokerage call to exchange line
(* For systems using 9 for a line)
T*9 exch. line
(or T*0 exch. line)
Make brokerage call to specific exchange line
(* For systems using 9 for a line)
T3 ext. Initiate conference call with extension
T39
(or T30)
Initiate conference call with free exchange line
(* For systems using 9 for a line)
T30 exch. line
(or T39 exch. line)
Initiate conference call with specific exchange line
(* For systems using 9 for a line)
T50 Redial last number (308 system only)