manualshive.com logo in svg

Dspecialists ISOSTEM Expert, User Manual

Share
Download
Dspecialists ISOSTEM Expert User Manual Download Page 39

ISOSTEM     USER MANUAL

GUI Software Reference     39

M

ONITORING AND

B

YPASS FUNCTIONS

This section features solo and mute buttons for each chan-
nel as well as a monitor source selector giving access to
various signals. Also, certain processing elements can be
bypassed with the "Functions" buttons. Please note that the
monitoring applies directly to the L, R, C, Sub, sL and sR
channels of the output matrix.

Channel Solos

Mute and solo buttons are available for each output channel.

Monitor – SURROUND

In SURROUND monitor mode, the

ISOSTEM

®

 surround outputs are moni-

tored through the multichannel outputs.

Monitor – STEREO

In STEREO monitor mode, the original stereo input signal is monitored
through the multichannel outputs (L/R).

Monitor – DOWNMIX

In DOWNMIX monitor mode, the downmixed surround outputs are moni-
tored through the multichannel outputs (L/R).

Monitor – INTERMIX

In INTERMIX monitor mode, the differential signal between the downmixed
surround outputs and the original stereo input signal is monitored through
the multichannel outputs (L/R).

Functions – ISO

The ISO button is used to toggle the ISO processing module between ac-
tive and bypass mode. The ISO function can be activated to ensure that a
stereo downmix of the

ISOSTEM

®

's surround output signals is perfectly

compatible with the original stereo source. This is done by creating the dif-
ference signal between downmix and stereo signal. This "intermix" signal is
then injected into the surround model in a way that downmix and stereo
signal are identical. The ISO function can be easily disabled for applications
not enforcing perfect compatibility between the two. The ISO function uses
the downmix parameters which are configured in the Misc window.

Please note:

 An activated Loudness Alignment function guarantees an

identical Programme Loudness of the resulting downmix and the stereo.

Functions – PHA

The PHA button is used to toggle the PHA processing module between
active and bypass mode. For more details on the PHA module, please refer
to the following chapter.

Summary of Contents for ISOSTEM Expert






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands