ISOSTEM USER MANUAL
GUI Software Reference 35
VM Window
The VM window features a graphic representation of the virtual 5.0 micro-
phone setup used by the VM module. The angle
set in the VM parameter section is represented
by two light grey lines; the form of the virtual mi-
crophones show the polar pattern set with the
"Lobes" parameter.
Rotation
This parameter sets the axial rotation of the VM module. Among other
things, it can be helpful in order to correct an imbalanced stereo picture.
The effect of editing this parameter can be monitored in the visualization.
Unit: Degrees
Range: -180° / +180°
Inputs Window
The Inputs window features an input matrix covering all signal processing
modules and all four AES3 inputs. One of the
signal inputs can be assigned to each of the
modules. Also, horizontal bar graph level meters
are available for all module input channels.
Please note:
L and R channels of each AES3
input are always switched in common.
Outputs Window
The Outputs window features a matrix covering all eight outputs of the in-
ternal bus system and all AES3 outputs. Each
physical output can be assigned to any one of
the bus outputs individually. However, it is not
possible to assign one bus output to more than
one physical output or vice versa. horizontal bar
graph level meters are available for all bus out-
put channels.
Please note:
L and R channels of each AES3 output can be switched in-
dependently.
stL/stR Select
“sL/stR Select” defines the source of the “+2” in the “5.1 + 2” format. This
“+2” stereo output channels stL/stR alternatively may be Stereo Reference
Input, LtRt, LoRo or 7.1 (being a -6 dB version of Ls-Rs channels).
Options: Stereo Reference, 7.1, LtRt, LoRo
