ISOSTEM USER MANUAL
GUI Software Reference 19
Input Data Stream
This display shows any valid audio data streams on the four AES
inputs.
F
IRMWARE
UPDATE DEVICE
Use this option to update the system firmware. Please follow the steps
described below. After the installation of the GUI the firmware files are
located in the installation folder within the “firmware” subfolder.
After clicking the UPDATE DEVICE button, the
GUI asks if the presets, stored on the device,
should be saved onto disk. It is advisable to
save them because the update overwrites all
presets. After clicking on Yes, the destination
folder can be chosen in a dialog. After that the
"Update Device Software" window will lead
you through the update process consisting of
steps 1 – 3.
Step 1 - "Open a Software File": Click the "OPEN FILE" button to select the
“.iup”
update file stored on your computer. The file path, name and size will
be displayed.
Step 3 - "Load File to Device": Click the
"LOAD" button to start transferring the file from
the GUI software to the hardware. Before
transfer, a dialog box shows some information
about the process details. Click “OK” to start
the transfer. The progression is shown by a
bar.
After the transfer is finished, the firmware update is ready
to be installed to the DSP. The "UPDATE" button is active.
1
In the firmware-subfolder the two iup-files „bundled_update.iup“ and „Iso-
stem_Update_vXXXX.iup“ are located. Both store an identical content – therefore it
is irrelevant, which file you select. Both files are linked to the matching iub-firmware
files which suit your device variant.
