Front Panel Configuration
36
6.2.3 EDITING A PARAMETER
Enter the editor as described above.
Press the
button or
buttons to cycle to the section you wish to view/change.
Press the
button or
button to select the parameter you wish to view/change within the
currently selected section.
To edit the parameter, press
to enter edit mode. The parameter begins to flash to indicate that
you are editing the value.
Press the
button or
button to change the parameter to the required value.
Press
to save the value. The parameter ceases flashing to indicate that it has been saved.
To exit the editor saving changes, press and hold the
button.
To exit the editor without saving changes, press and hold the
button.
NOTE: The editor automatically exits after 5 minutes of inactivity to ensure security.
NOTE: The PIN number is automatically reset when the editor is exited (manually or
automatically) to ensure security.
NOTE: More comprehensive module configuration is possible using the DSE Configuration
Suite PC software. Please contact us for further details.
6.2.4 DISPLAY EDITOR CONFIGURATION TABLES
Section
Parameter As Shown On Display
Values
Display
Contrast
36%
Language
English, others.
