DSC Touch-SCW9067, Installation Manual

Page: 69 / 114

SYSTEM TESTS
SENSOR TEST FIND IT
Settings
System
Tests
Sensor Test
The panel can test it’s connection and communication to the individual
security sensors. Before running this test there must be at least one security
sensor paired with the system.
Sensor Test
Sensors connected to the panel will appear on the screen.
Tamper or open a sensor to test. (refer to individual sensor
documentation for instructions if needed.)
The panel will audibly report and display test results for the
sensor being tested.
Green (pass) or Red (fail).
Note: For UL/cUL , perform a placement test first for all wireless initiating
devices. The acceptable result shall be "Excellent".
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 69 114
© Last updated 4/29/15 All rights reserved
Excellent 3+ RF packets received
Pass 1 - 2 RF packets received
No Signal No RF packets received