DSC Touch-SCW9067, Installation Manual

Page: 108 / 114

LEGAL
F. WARNINGS
Warning : Do not connect the Product to an AC receptacle that is controlled by a switch.
Warning : Do not connect the Product to a High Power AC receptacle.
Warning: This Product should be installed in accordance with the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269). Printed information describing proper installation, operation, testing, maintenance, evacuation planning, and repair service is to be provided with
this Product. In Canada the product shall be installed in accordance with the Standard for the Installation of Residential Fire Warning Systems, CAN/ULC-S540.
Warning : Owner’s instruction notice: The Product is not to be removed by anyone except occupant or certified dealer representative.
Warning : This Product and all sensors associated with it (collectively, the “System”) should be tested once a week.
Warning : This System must be checked by a qualified technician at least once every three (3) years.
Warning : Users are advised to create their own Fire and Emergency Evacuation plan. Information to create a plan can be found at the following website, National Fire
Protection Association ( http://www.nfpa.org/categoryList.asp?categoryID=1979 ), United States Fire Administration ( https://apps.usfa.fema.gov/publications/ ) or via
other equivalent agencies.
Warning : This System cannot call the local police station directly … all Police Panic Alarms and Intrusion Alarms will be sent to the dealer authorized central monitoring
station who will then handle calling the local police as necessary. The Product cannot be configured to call the local police station.
Warning : This System cannot call the local fire station directly … all Fire Panic Alarms and Fire Detection Alarms will be sent to the dealer authorized central monitoring
station who will then handle calling the local Fire Department as necessary. The Product cannot be configured to call the local Fire Department.
Warning : This System cannot call the local medical emergency personnel directly … all Aux Panic Alarms will be sent to the dealer authorized central monitoring station
who will then handle calling the local medical emergency personnel (often 911 personnel) as necessary. The Product cannot be configured to call the local medical
emergency personnel (nor local 911 services).
Warning : The terminal block that is mounted inside the Product has 8 connectors for wires. There are two additional connectors for the first external sensor (labeled
EXT1 + and EXT1 -), two additional connectors for the second external sensor (labeled EXT2 + and EXT2 -), and finally, two additional connectors for an external siren
(labeled and BUZZER -).
Warning: For Canadian installations this Product and all sensors associated with it (collectively, the “System”) should be tested once a month. The test shall be performed
also with primary AC power de-energized. For recommended smoke detectors maintenance instructions refer to user manuals associated with compatible DSC models
WS4916 and WS4926 smoke detectors.