manualshive.com logo in svg

DSC PowerSeries PC1404 V1.1, Installation Manual, Page: 25 / 56

Share
Download
DSC PowerSeries PC1404 V1.1 Installation Manual Download Page 25

PC1404 

18

5 Programming Worksheets

Note: 

For more details, see PC1404 Programming Descriptions in the Technical Library section of http://www.dsc.com.

5.1 Index to Programming Worksheets

 

Programming Option                                                PWS

Programming Option

                                              

 PWS

[000] Keypad Function Key Programming ..................... 19

[001] Zone Definitions .................................................... 19

[005] System Times ....................................................... 20

[006] Installer Code........................................................ 20

[007] Master Code ......................................................... 20

[008] Maintenance Code................................................ 20

[009] PGM Output Prog.  ............................................... 20

[010] PC5208 PGM Output Prog ................................... 20

[011] PC5204 PGM Output Programming...................... 21

[012] Keypad Lockout Options....................................... 21

[013] First System Options............................................. 21

[014] Second System Options ....................................... 21

[015] Third System Options ........................................... 21

[016] Fourth System Options ......................................... 21

[017] Fifth System Options............................................. 22

[018] Sixth System Options............................................ 22

[020] Keypad Zone Assignments ................................... 22

[022] Ninth System Options ........................................... 22

[023] Tenth System Options........................................... 22

[030] Zone Loop Response Options .............................. 23

[101]-[108] Zone Attributes............................................. 23

[168] Daylight Savings Time Begins .............................. 24

[169] Daylight Savings Time Ends ................................. 24

[170] PGM Output Timer ................................................ 24

[175] Auto-Arm Postpone Timer..................................... 24

[176] Cross Zone/Police Code Timer ............................. 25

[181] Auto-Arm Time of Day........................................... 25

[190] No Activity Arming Pre-Alert Timer........................ 25

[191] No Activity Arming Timer ....................................... 25

[199] Auto-Arming Pre-Alert ........................................... 25

[301] First Telephone Number........................................ 25

[302] Second Telephone Number .................................. 25

[303] Third Telephone Number ...................................... 25

[304] Call Waiting Cancel String .................................... 25

[305] Fourth Telephone Number .................................... 25

[310] System Account Code........................................... 25

[320] Alarm Rep. Codes................................................. 25

[324] Alarm/Restore Rep. Codes ................................... 25

[328] Misc. Alarm Rep. Codes ....................................... 25

[329] Priority Alarm/Restore Rep. Codes ....................... 26

[330] Tamper Rep. Codes .............................................. 26

[334] Tamper Restore Rep. Codes ................................ 26

[338] Misc. Tamper Rep Codes...................................... 26

[339]-[340] Closing (Arming) Rep. Codes ...................... 26

[341] Misc. Closing (Arming) Rep. Codes...................... 26

[342]-[343] Opening (Disarming) Rep. Codes ............... 26

[344] Misc. Opening (Disarming) Rep. Codes. .............. 27

[345] Maintenance Alarm Rep. Codes ........................... 27

[346] Maintenance Restore Rep. Codes........................ 27

[347] Misc. Maintenance Rep. Codes ............................ 27

[348] Test Transmission Rep. Codes ............................. 27

[350] Communicator Format Options............................. 27

[351] Alarm/Rest. Comm. Call Directions....................... 27

[359] Tamper Alarm/Rest. Comm. Call Directions.......... 27

[367] Opening/Closing Comm. Call Directions............... 28

[375] System Maint. Alarm/Rest. Comm Call Dir. .......... 28

[376] System Test Trans. Comm. Call Directions........... 28

[377] Communication Variables ..................................... 28

[378] Test Transmission Time of Day ............................. 28

[380] First Communicator Options ................................. 28

[381] Second Communicator Options ............................ 29

[382] Third Communicator Options ................................ 29

[383] Fourth Communicator Options.............................. 29

[401] Downloading Option Codes .................................. 29

[402] Downloading Computer’s Tel. Number ................. 30

[403] Downloading Access Code ................................... 30

[404] Panel ID Code....................................................... 30

[405] Answering Machine Double Call Timer ................. 30

[406] Number of Rings to Answer On ............................ 30

PGM Output Attributes

................................................ 30

[501]-[502] Main Board .................................................. 30

[503]-[510] PC5208........................................................ 30

[511]-[514] PC5204 ........................................................ 30

[551]-[564] PGM Zone Assignment................................ 31

[601] Closing (Arming) Reporting Codes ....................... 32 

[605] Opening (Disarming) Reporting Codes................. 32

[700] Automatic Clock Adjust ......................................... 32

[701] First International Options..................................... 32

[702] Second International Options................................ 32

[703] Delay Between Dialing Attempts........................... 32

[900] Panel Version........................................................ 32

[901] Installer Walk Test Mode Enable/Disab................. 32

[902] Module Supervision Reset .................................... 32

[903] View Module Supervision...................................... 32

[990] Installer Lockout Enable........................................ 32

[991] Installer Lockout Disable....................................... 33

[999] Restore Panel Factory Default Prog. .................... 33

Summary of Contents for PowerSeries PC1404 V1.1

























































Reviews:

No comments