DSC PC3OOO, Installation Manual

Page: 37 / 44

33
PC3000 Version 7.51
[47] Modem Configuration
Page 22
This section is used to set up the panel for downloading functions. The following table shows the On/Off patterns
of zone lights 1 through 4 which are used to set the Number of Rings before the panel will answer a call from the
downloading computer. The default setting is 12.
Number of Rings Default
1 2 3 4 5 6 7 8 9 10 11 12
Zone Light 1 On Off On Off On Off On Off On Off On Off
Zone Light 2 Off On On Off Off On On Off Off On On Off
Zone Light 3 Off Off Off On On On On Off Off Off Off On
Zone Light 4 Off Off Off Off Off Off Off On On On On On
Default Zone Light On Zone Light Off
Off Zone Light 1 Set light patterns for number of rings as described in the above table.
Off Zone Light 2
Minimum number = 1
On Zone Light 3
Maximum number = 15 (all lights on)
On Zone Light 4
At least one light must be on.
Off Zone Light 5
..............................
Downloading answer enabled Downloading answer disabled
Off Zone Light 6
..............................
User initiated call up No user initiated call up
Off Zone Light 7
..............................
Answering machine over-ride Answering machine over-ride
enabled disabled
Off Zone Light 8
..............................
Call back enabled Call back disabled
[48] Panel Identification Code
Page 22
Default
5 0 5 0
Enter 4 digits from 0 to 9. DO NOT ENTER [Q] OR [#].
[49] Printer Configuration
Page 22
Default Zone Light On Zone Light Off
Off Zone Light 1 .................. 110 baud Not 110 baud
Off Zone Light 2 .................. 300 baud Not 300 baud
Off Zone Light 3 .................. 1200 baud Not 1200 baud
On Zone Light 4 .................. 2400 baud Not 2400 baud
Off Zone Light 5 .................. Printer only Printer and norm. communication
Off Zone Light 6 .................. See page 23 Printer and norm. communication
Off Zone Light 7
..............................
(RTS, PIN 4) (DTR, PIN 20) (SRTS, PIN 11)
Off Zone Light 8 .................. Periodic download Test transmission
[50] After Alarm Reporting Code
Page 23
Entering a valid reporting code will enable this feature.