DSC GS3105 Series User Manual Download Page 71

Page: 71 / 77

GS3125/GS3105



CAUTION - These settings also automatically update the parameters on the “SMS dialer”, “Voice dialer” and
“Phonebook” pages.



Control String: In this column, enter the string (maximum 16 alphanumeric characters) to be sent by SMS when you wish
to activate/deactivate the corresponding remote output. This feature will operate even if caller identification is not enabled.



Activation Confirmation: Use this column
to select the type of confirmation you want
when the output is activated. There are 3
different options to choose from: None, Ring
or SMS (the latter option is not available if
the Control string box has been left
empty). The output activation confirmation
is forwarded by means of a SMS when the
output is activated by SMS.



Monostable: Normally the outputs, when
activated, remain so until a deactivation
command is received, at which point the
output will revert to its standby status. If
you want the output to revert to its standby
status automatically after a set amount of
time, select this option and set the activation time using the adjacent Monostable Time (sec) box.



Monostable Time (sec): In this box, enter the value in seconds (from 1 to 86400 in steps of 1 second) indicating the time
period for which the output, if set as Monostable, will remain active before reverting to its standby status (ON Time).

Voice Dialer (GS3125 series only)

This section is used to program all parameters relating to the voice dialer, namely: the telephone numbers to call (the first 8
numbers in the phonebook), the number of repetitions for each message (minimum 1, maximum 8), the duration and number
of the messages in accordance with the following specifications:



Description: This column lists the events for which a voice message may be programmed.



To select voice messages for the 3 programmable input lines, set the corresponding terminal as an input (see I/O->Type).



Telephone numbers: Click the ‘12345678’ columns in accordance with the desired event. The tick



indicates that a

particular telephone number will be called when an event occurs. Click the boxes to enter/remove the tick





The telephone numbers are the first 8 entries on the “Phonebook” page.



Voice Message: Triple-click the ‘Message’ column corresponding to the desired event, then click the button to scroll
through the list of messages (up to 8 messages can be selected, each with a maximum duration of 16 seconds) and
select one. Up to 3 voice messages can be selected for each event (Message#1, Message#2, Message#3).



Repeat Call: This field is used to enter the number of attempts to be performed (up to a maximum of 8) if the call is not successful.



Repeat Message: This field is used to enter the number of times a message is repeated (up to a maximum of 8) when
the call is answered.



Call All Numbers: Select this option



to call all telephone numbers programmed for an individual event and play the

voice message assigned to it. If this option is not selected



, the dialer will end the voice calls as soon as one of them

has been completed successfully.



Call Confirmation: Select this option if you want the dialer to wait for confirmation from the remote user that the voice
message has been received, otherwise the dialer will attempt to deliver the voice message again: the remote user can

send confirmation by pressing the



button on his/her telephone (only applies to touch-tone keypads).



CAUTION - By pressing the



button on your own telephone when listening to a voice message, both

the current telephone call and any others in progress may be blocked.



In some cases the dialer may misinterpret the answer from answering machines, ringback tones, GSM

operator courtesy messages, etc. Users are advised to enable the “Call Confirmation” function.

Input line