DRUCK TEMPERATUR
&
Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • [email protected] •
DT
www.druck-temperatur.de
MANUAL
TLDMM
Referezdruckmessgerät
2.0
TLDMM
reference pressure gauge
2.0
34
Absolute-pressure measuring ranges <1 bar absolute are, by defini on, in an overload condi on
at atmospheric pressure.
5.2 Tigh ng the pressure port (depends on the pressure range of the instrument
5.3 Preliminary checks
Be sure that pressure provided is not higher than the instruments full scale value. Mount the
instrument as suggested. If the device is installed in a calibra on circuit, please perform a
bleeding before star ng to work.
5.4 Switch on the instrument
When switched on, the instrument performs a self-test (about 3 seconds), showing
the firmware version and the full scale value of the instrument.
A er this test, the measured pressure is displayed.
5.5 Error messages
UUUUU
Overpressure. A pressure above the instrument‘s full scale value is applied.
Immediately reduce the applied pressure!
Instrument‘s calibra on may become invalid if a too high pressure is applied.
LLLLL
Nega ve scale overflow. A pressure below the instrument‘s start value is applied.
Immediately increase the applied pressure!
HHHHH
If pressure unit is changed, and the present pressure value cannot be displayed
due to display resolu on limita ons (max. 99999). Change pressure unit to another
one.
Too low ba ery level. Indicated pressure values are not reproducable or might be
wrong. Charge ba ery immediately.
Ba ery is fully charged.
Pressure ranges up
to 1000 bar:
Sealing with USIT
ring 12.7 x 18 x 1.5
Pressure ranges >1000 bar
Sealing with sealing cone
(2 pcs. included in standard supply)
Pressure ranges up
to 1000 bar:
Sealing with O-ring
