DRS DRS-M210-V2, Manual

Page: 9 / 27

Parachute Manual DRS-M210-V2
©2020 Drone Rescue Systems 9/27
Mount the cords
Make sure the drone is in a stable
upside position. Select one of the
front arms of the UAV. Mount one
Parachute cord to the arm and pull it
around close to the hinge. Thread one
end of the cord through the other
end’s loop. Repeat the steps on the
other front arm and tighten the
Parachute cords well.
Mount the Container cord similar to
the Parachute cord s on to the left arm
of the UAV rear side and tighten it
well.
Put the Hook and loop fastener over
each Parachute cord and the
Container cord.