DRS DRS-M210-V2, Manual

Page: 11 / 27

Parachute Manual DRS-M210-V2
©2020 Drone Rescue Systems 11/27
Remove the protection film from the
adhesive tape on the bottom side of the
Cord box and press the box on the
center of the UAV with the slots
pointing to the arms with the
Parachute
cords . There should be a minimum
distance of 2mm between Cord box and
Mounting plate . Tighten each Parachute
cord and put it through the slots of the
Cord box . Stuff the remaining cords
inside, then clip the Cord box lid onto
the Cord box .
Caution:
If the Container cords are not tightened well, the cords might get into the UAV
propeller and cause a crash!
CORRECT INCORRECT