Copyright © 2001-2018, Dr Robot Inc. All Rights Reserved.
www.DrRobot.com
V.07.08.18.Q
- 15 -
On normal program exit, Google Earth will be closed. However, you should double check by using “Windows Task
Manager”; otherwise, you may not be able to display Google Earth when you start Jaguar control program again.
is Emergency Stop for manipulator arm (disable) action.
You could click the
button to resume the manipulator arm controller.
Recharging
Jaguar robot uses high performance LiPo batteries. Extreme caution is needed when dealing with this type of
battery, explosion and damage could occur. Please read the Charge Station manual first and follow all the safety
rules before proceeding further.
1) Turn off the robot
2) Loose the locking screws of the Battery Box, disconnect the 2-Pin
Tamiya connector and take the Battery Box out.
3) Power on the Charge Station. Use
to make sure "LiPo BALANCE" is
displayed on the LCD screen. If not, use "Type/Stop" button to change battery type to "LiPo Battery" and press
to set charging mode to “LiPo BALANCE” .
4) You can use
+
/
+
buttons to change the charge
current, DO NOT exceed the 2A charging current and do not modify the battery voltage. It should be "22.2V
(6S)" for Jaguar robot.
5) Connect the charging 7-Pin, 3-Pin & 2-Pin connectors to charger as below images.
