Drolet HEATMAX II DF01001, Installation And Operating Instructions Manual

Page: 35 / 79

HeatMax II Furnace Installation and Operation Manual
35
Appendix 1: Optional thermostat installation
Using a thermostat will help you maintain a constant temperature throughout the house. A
fixed wall mounted 24v thermostat is required.
Note: Thermostat manufacturer’s instruction always overrides the information
published in the following section.
Thermostat location
- Must be installed on an inside wall of the
house;
- Where it will be the least affected by
affected by air currents from a hot air outlet
or cold outside walls;
- Must be installed at a minimum of 55" (140
cm) above the floor.
- Must be installed at a minimum of 15’ (4.57
m) from the furnace and must not receive
radiation from the glass door.
Thermostat wiring