2.
Examination before installation and purchase history
Every Drivecon inverter has been fully tested and examined before shipment. Please carry
out the following examination procedure after unpacking your inverter.
•
Verify that the inverter model number is the same as the one you ordered.
•
Check to see if there is any damage that may have occured during transit. Do not
connect the inverter to the power supply if there is any sign of damage.
Report to regional sales representative or Driveco
n
if you find any abnormal
conditions as mentioned above.
Caution!
Failure to inspect the inverter may lead to damage of the system and avoidable
down time. Should you find any reason to suspect the unit itself or any aspects
of the system to be faulty please contact Driveco
n
toll free at 800-
374-8266 or
847-855-9150.
Be prepared to provide model number of your controller and any other pertinant
information relative to the system.
Purchase history
Please take a moment and record the following information for future reference:
Model:
_______________________
Serial number:
_______________________
Date purchased:
_______________________
Date installed:
_______________________
Installed by:
_______________________
Dealer:
_______________________
2
