Drinkpod 1000 Pro Series, Installation Manual

Page: 41 / 67

Installing Your Water 1000 Pro Series
Installing Your Water 1000 Pro Series
2-39
Diagram 2.6.4-B - Extending Female Compression Hose or Port With Brass Union
Merging
acc.
2x
acc.
P
This is where we will be connecting both appliances to
E
1/4 in. Brass Compression Tee
, then running a single merged line to the final
destination. The instruction on how to connect both configurations are identical, only the
ports each is connected to differ. Follow the relevant instructions for each connection
below, using the specified ports of the diagrams that follow.
acc.
2x
2 Accessory Appliance Configuration
will require another section of
A
1/4 in. White PP Tubing connected through a
B
1/4 in. Compression To Quick Connect Adapter
to your
E
1/4 in. Brass Compression Tee, with the other end running to your
Drinkpod 1000 Pro Series.
acc.
P
Parallel Configuration
will use the existing line you ran from the Water Source at
the beginning of the installation process. However, you will remove
C
1/4 in. Quick Connect Shutoff Valve that you connected to our Water Source Line
back at “Running Water Source Line Step #4” on page 2-23 - be sure to shutoff
water flow at your source prior to disconnecting. You will also need an additional
section of
A
1/4 in. White PP Tubing to run from a
B
1/4 in. Compression To Quick Connect Adapter connected to the Brass
Compression Tee port specified in “Diagram 2.6.5-B” on page 2-41 , and on to your
Drinkpod 1000 Pro Series. You will connect the
Shutoff Valve
to the other end of this