Page 6
SKU 92879
For technical questions, please call 1-800-444-3353
13.
Always switch to a fresh battery (or recharge) when tool performance begins to
diminish. Severe heat is most destructive to a battery; the more heat generated, the
faster the battery loses power. A battery that gets too hot can be permanently
damaged. Never over-discharge a battery by using the tool even after tool
performance is decreasing. Never attempt to discharge a tool’s battery by continuing
to keep the tool running. When tool performance begins to diminish, stop the tool,
recharge the battery and use the fresh battery for optimal performance.
14.
Recharge the battery monthly even if not used.
UNPACKING
When unpacking, check to make sure that all the parts are included. Refer to the Assembly
Drawing and Parts List at the end of this manual. If any parts are missing or broken, please
call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
CHARGING BATTERY
The Battery (36) does not come charged from the factory. First time, charge for eight hours
before using.
1.
Slide the Battery into the Charger Adapter (38) base. The Battery can only insert one
way. See photos at the top of page 7.
2.
Plug the Charger Adapter plug into an electrical outlet.
3.
Press the Set button on the Charger Adapter.
The Charging Indicator turns red, indicating charging. Charge the new Battery for
eight hours. Subsequent charges should take approximately one hour.
When charging is complete, the Charging Indicator turns green.
4.
Unplug the Charger Adapter from the electrical outlet.
Cutting Bit (37)
Battery (36)
Charger Adapter (38)
Circle Guide (2, 5, and 6)
not shown
Cutout Tool
Cutting Bit (40)
Spanner Wrench (39)
