background image

Page 11

SKU 92879

       For technical questions, please call 1-800-444-3353

PARTS LIST

Part #

Description

Part #

Description

1.

 

Wheel

21.

 

Spring

2.

 

Ruler

22.

 

Spindle Lock Button

3.

 

Nut, ¼-20

23.

 

Spring

4.

 

Screw, ¼-20

24.

 

Label

5.

 

Ball Handle

25.

 

Cover, Switch

6.

 

Pivot Screw

26.

 

Switch

7.

 

Support Cover

27.

 

Wire, 18 AWG, 5”

8.

 

Wheel Screw

28.

 

Wire, 18 AWG, 5”

9.

 

Knob, Height Adjust

29.

 

Wire, 18 AWG, 5”

10.

 

Nut, M4

30.

 

Piece

11.

 

Support

31.

 

Wire Case, ABS

12.

 

Knob

32.

 

Screw, 4x16

13.

 

Screw

33.

 

Body, Right

14.

 

Collet Nut

34.

 

Body, Left

15.

 

Crimp, 1/8”

35.

 

Label, Right

16.

 

Bearing

36.

 

Battery, 18V

17.

 

Shaft

37.

 

Cutting Bit, 1/8”

18.

 

Motor Guide

38.

 

Charger Adapter

19.

 

Motor

39.

Wrench, Spanner

20.

 

Rubber Pole

40.

Cutting Bit, ¼”

NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replace-
ment parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.

Summary of Contents for 92879













Reviews: