User Manual
ELECTRIC IN BUILT OVEN | EUROPA 60 ELÉCTRICO
19
The panels of the adjacent cabinets should be made of heat-resistant material. In
particular, cabinets with a veneer exterior should be assembled with glue that can
withstand temperatures up to 100
℃
.
In accordance with current safety standards, contact with the electrical parts of the
oven should not be possible once it has been installed. All parts, which make
possible the safe operation of the equipment, must only be removed with the help of
a tool.
To attach the oven to the cabinet, open the oven door and join it by inserting the 4
screws into the 4 holes located on the edge of the frame.
Electric connection.
• Furnaces equipped with a three-pole power supply cord are designed
to operate with alternating current.
• The equipment ground wire is yellow-green.
Installing a Power Cord
Open to terminal board:
Using a screwdriver, press the
latches into the side tabs of the
terminal board cover;
Unscrew the bolt, pull to open the
deck of the board. To install the
cable, proceed as follows:
Remove the clamp screw and the three L-N-
Fasten the wires below the screw heads using the following color scheme:
Blue (N) Brown (L) Green-Yellow
