Dreame Bot Z10 Pro, User Manual

Page: 10 / 110

16 17
EN EN
Clean the Main Brush Clean the Side Brush
Clean the Main Wheel/Omnidirectional Wheel
Routine Maintenance
Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
Pull out the side brushes and use the cleaning tool to remove any hair
tangled on the brush.
Pull out the brush covers as shown in the diagram. Use the included cleaning
tool to remove any hairs tangled in the brush.
Note: When there is hair tightly tangled in the main brush, do not pull out the
hair excessively to avoid damaging the main brush.
Note: Use a tool such as a small screwdriver to separate axle and tire.
Clean the Laser Distance Sensor
/Edge Sensor
Clean the Charging Contact
Clean the Charging
Contacts and Dust Intake
Clean the High Precision 3D
Clean the Cliff Sensor
Routine Maintenance
Note: Wet cloths can damage sensitive elements within the robot and base. Please use dry rags for cleaning.