-18-
Activating the network
Choose the desired network controller usning the
Navigation-But-
tons up/down
and press the
OK-Button
to select.
Usually the standard setting (Use DHCP) should work if you have
connected your Dreambox to a internet router. The DHCP-Server
needed for this setting is most of the time activated by default on
a router.
For further information please refer to chapter 10.5 Network.
Press the
OK-Button
on your remote control to get to activate the
network device.
Answer “yes“ by pressing the
OK-Button
to finally activate the net-
work device.
The activation process will take a short while.
Once the activation process is finished you will see the message
depicted on the left.
