Quickstart
9
2
Quickstart
This chapter provides a quick start guide and explains all essential features
and settings to get your Targa device up and running. For an in depth
explanation off all features see chapter 3.
2.1
Connecting Targa
Targa can be connected to a display using the HDMI or HD-SDI output. Analog
audio can be connected over 3.5mm audio in and out jacks.
To receive a video stream connect Targa via the ETH port using an Ethernet
cable and proceed with “Power-on”.
2.2
Power-on from DC Adapter
Connect the DC Adapter to the power connector, then switch on the power
switch.
2.3
Power-off in DC Adapter Mode
Simply switch of the power switch.
2.4
Configuration of the Transmitter
The decoder will need to be configured once using the Ethernet cable.
The default static decoder IP address is: 192.168.1.1
2.4.1
Adjusting the Computer’s IP Address
Configuration is made on the encoder’s web interface. For access, your
computer’s IP address for the Ethernet network connection must be inside
the 192.168.1.XXX subnet (e.g. 192.168.1.2)
To set the IP address, open your start menu and search for “Network and
Sharing Center”, open it and then click on your current connection (e.g.
“Local Area Connection”). In the next window click “Properties” and then
double-click “Internet Protocol Version 4 (TCP/IPv4)”. Chose “Use the
following IP address” and enter the following numbers:
