Quickstart
12
The web interface can be used to configure all functions of the Targa
Receiver. It is navigated using the main tabs which are displayed below the
Dream Chip logo and version string. Each tab can have multiple sub tabs with
further settings and information.
On many tabs, the following buttons can be found:
Button
Description
Deletes the related settings (e.g. a streaming
destination). Make sure you don’t need the settings
anymore as you cannot undo this step.
Adds e.g. a streaming destination without changing or
deleting another one.
Resets the related settings to default settings.
Saves the related settings, but does not apply them
Saves and applies the related settings
After making changes to a tab please click on the “Save & Apply” button in
the lower right corner of the tab page. Please note that execution of the new
settings might take a while (especially if settings of the encoder are changed),
because the Targa device has to be reconfigured. The web interface will
inform you with a notification in the top left corner of the tab when the
settings have been successfully applied.
